The WM-N-BM-30 wireless WICED module which is a small size module and
consists of a Broadcom BCM40181 single-chip, a ST STM32F411CEY6 MCU, and
a 2.4G antenna. The WM-N-BM-30 provides for the highest-level
integration, featuring 802.11b/g and 802.11n.
It includes a 2.4 GHz WLAN CMOS power amplifier (PA) that meets the output power requirements of most handheld systems. An optional external low-noise amplifier (LNA) and external PA are also supported. Along with the integrated power amplifier, the WM-NBM-30 also includes integrated transmit and receive baluns, further reducing the overall solution cost.
The small size & low profile physical design make it easier for system design to enable high performance wireless connectivity without space constrain. This multi- functionality and board to board physical interface provides SPI/I2C/UART interface options.
Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to provide the latest security requirement on your network.
For the software and driver development, USI provides extensive technical document and reference software code for the system integration under the agreement of Broadcom International Ltd.
Hardware evaluation kit and development utilities will be released base on listed OS and processors to OEM customers.
Features
BCM40181 Wi-Fi
z Single band 2.4GHz IEEE 802.11b/g/n z Supports wireless data rates up to 65Mbit/s z Integrated RF power amplifier
STM32F411CEY6 Microprocessor
z ARM 32-bit Cortex-M4 CPU z CPU frequency up to 100MHz z 512 Kbytes of Flash memory z 128 Kbytes of SRAM z Low-power sleep, standby and stop modes z Extend one 4M-bit Flash memory WM-N-BM-30 Wireless Module
z Featuring integrated IEEE 802.11 b/g/n z Supports per packet Rx Antenna diversity z Low power consumption & excellent power management performance extend battery life. z Small size suitable for low volume system integration. z Easy for integration into mobile and handheld device with flexible system configuration. z 2.412-2.484 GHz two SKUs for worldwide market. z Lead Free design which supporting Green design requirement, RoHS Compliance.
Device Package z 28x20 mm
It includes a 2.4 GHz WLAN CMOS power amplifier (PA) that meets the output power requirements of most handheld systems. An optional external low-noise amplifier (LNA) and external PA are also supported. Along with the integrated power amplifier, the WM-NBM-30 also includes integrated transmit and receive baluns, further reducing the overall solution cost.
The small size & low profile physical design make it easier for system design to enable high performance wireless connectivity without space constrain. This multi- functionality and board to board physical interface provides SPI/I2C/UART interface options.
Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to provide the latest security requirement on your network.
For the software and driver development, USI provides extensive technical document and reference software code for the system integration under the agreement of Broadcom International Ltd.
Hardware evaluation kit and development utilities will be released base on listed OS and processors to OEM customers.
Features
BCM40181 Wi-Fi
z Single band 2.4GHz IEEE 802.11b/g/n z Supports wireless data rates up to 65Mbit/s z Integrated RF power amplifier
STM32F411CEY6 Microprocessor
z ARM 32-bit Cortex-M4 CPU z CPU frequency up to 100MHz z 512 Kbytes of Flash memory z 128 Kbytes of SRAM z Low-power sleep, standby and stop modes z Extend one 4M-bit Flash memory WM-N-BM-30 Wireless Module
z Featuring integrated IEEE 802.11 b/g/n z Supports per packet Rx Antenna diversity z Low power consumption & excellent power management performance extend battery life. z Small size suitable for low volume system integration. z Easy for integration into mobile and handheld device with flexible system configuration. z 2.412-2.484 GHz two SKUs for worldwide market. z Lead Free design which supporting Green design requirement, RoHS Compliance.
Device Package z 28x20 mm